Creating ties – Extron Electronics FPC 5500 User Manual
Page 31
Extron FPC 5500 • Matrix System Operation
25
Creating Ties
There are two ways to make ties (see figure
21):
•
You can select an input and an individual output on the Make Ties: dual keypad
screen (see
e
in figure 21).
•
You can select an input and then select one or a group of outputs on the
Make Ties: alternate view screen (see
f
in figure 21).
You can make ties or groups of ties individually, on the fly, or create a series (queue) of
potential ties or groups of ties to switch all at once.
NOTE: When you touch the green Change View button, the output area of the
screen toggles between the all-ties view and the one-tie-at-a-time view.
Make Ties: dual keypad screen
Make Ties: alternate view screen
5
6
Figure 21.
Make Ties Screens Flowchart
NOTE:
When you touch the green Change View button, the output area
of the screen toggles between the all-ties view and the one-tie-at-
a-time view. The Change View button does not change.
NOTE:
The Make Ties screens on
a FOX Matrix 320x system
also include an Untie
all Outs on this
Input button.