Extron Electronics FPC 5500 - Manual (Page 38)

Extron FPC 5500 • Matrix System Operation 32
DSVP Screen
NOTE: This screen is available on Matrix 12800 systems only.
You can monitor each RGBHV and RGBS input to see if active sync signals are present on the
DSVP™ (Digital Sync Validation Processing™) screen (see figure
24). Access the DSVP screen
by touching the blue User > amber DSVP buttons.
Figure 24. DSVP Screen
Where an input has active sync present, the DSVP screen reports a snapshot in time of
the frequencies in the Horizontal and Vertical frequency fields. Where no active
sync signals are present, the DSVP screen shows —— in the Horizontal and Vertical
frequency fields. Inputs that have not been virtualized (see your matrix user guide for more
information) or for which there is not a sync BME (on a Matrix 12800 system) are marked by
n/a in the Horizontal and Vertical frequency fields
. Update the DSVP screen to
display fresh frequency reading by touching the green Update button.