Extron Electronics FPC 5500 - Manual (Page 41)

Extron FPC 5500 • Matrix System Operation 35
Status Screen, Physical Layout
NOTE: This screen is available on FOX Matrix 14400 and 320x systems only.
The Physical Layout area of the Status screen for FOX Matrix 14400 and 320x systems shows
a diagram of all the I/O boards installed into the system, as well as the status of each input
on every board.
For FOX I/O 1616 Fiber Optic boards only:
• Multimode inputs with a link present are indicated in green.
• Multimode inputs without a link present (missing) are indicated in
red.
• Singlemode inputs with a link present are indicated in light green.
• Singlemode inputs without a link present (missing) are indicated in
pink.
For FOX I/O 1616 HD-SDI Boards only:
• Inputs with a signal present are indicated in yellow.
• Inputs without a signal present (missing) are indicated in orange.
For all compatible boards:
• SFP modules that are not installed are indicated in white.
Remotes Screen
The Remotes screen (see figure 27) is a reference screen only, with no active functions. The
screen shows the status of all possible MKP 1200 Remote Keypads. Information displayed
includes: address, mode, parameter, model, and firmware version.
NOTE: This screen is available on Matrix 12800 systems only.
Figure 27. Remotes Screen