Extron Electronics IPCP 505 User Guide User Manual
Page 30
IPCP 505 • Software-based Configuration and Control
24
1.
Open the Network Connections page as follows:
•
Locate and right-click on My Network
Places on the Windows 2000,
Windows XP (or higher version) desktop,
then click on Properties.
or
•
Click on the Start menu, click on Settings
(if needed), click on Control Panel to open the Control Panel window, and
double-click on Network and Dial-up Connections (Windows 2000),
Network Connections (Windows XP, shown below),
or Network and Sharing Center (Windows 7, shown below).
2.
Access the properties dialog box.
•
For Windows XP, right-click on Local Area Connection, then select
Properties.
•
For Windows 7, click on
Local Area Connection to open
the Local Area Connection Status
dialog box, then click Properties.