Extron Electronics IPCP 505 User Guide - Manual (Page 73)

IPCP 505 • SIS Pr
ogramming and Contr
ol
67
Command/Response Table for SIS Commands (continued)
Command ASCII (Telnet)
(host to IPCP)
URL Encoded (web)
(host to IPCP)
Response
(IPCP to host)
Additional description
Password and security settings
Read the security level of the
connection E CK } WCK | X5@ ]
or Pvl
X5@ ]
For X5@ :
0 = not logged in
11 = user
12 = administrator.
The response includes leading zeros.
Set administrator password 24 E X3#
CA
}
W
X3#
CA
|
Ipa•
X4! ]
Set the administrator access password (
X3#
,
4 to 12 alphanumeric characters). The
password is case sensitive. Special
characters (spaces, symbols) are not allowed.
X4! = Password to display on screen
(response to password query).
X4! is 4 asterisks (****) if a password has
been assigned, or it is an empty field ( )
if a password has not been assigned.
Clear administrator password 24 E • CA } W%20 CA ] Ipa• ] Clear/remove all passwords (administrator
and user).
NOTE: If the administrator password is cleared, the user password is also cleared.
Read administrator password 24 E CA } WCA | X4! ]
Set user password 14, 24 E X3# CU } W X3# CU | Ipu• X4! ] Set the user password ( X3# is 4 to 12
alphanumeric characters). The password is
case sensitive. Special characters (spaces,
symbols) are not allowed.
X4! = Password
that is displayed on screen.
NOTE: A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user password is also
cleared.
Clear user password 24 E
• CU
}
W%20CU
|
Ipu•
] This clears the user password only.
Read user password 24 E CU } WCU | X4! ]