Extron Electronics MS9500 HD FrEND Plus - Manual (Page 28)

MS9500GL HD FrEND Plus Chapter 2: Player Configuration - LCD
• System Time – Enter the time required using the encoder, select OK and press <ENC> to save. ‘System
Date’ window appears.
• System Date – Enter the required date using the encoder, select OK and press<ENC> to save. The display
reverts to the System menu page.
Computer name
Use this menu to give the player (computer) a unique name for use with your control system:
1. Select ‘Computer Name’ a ‘qwerty’ keyboard display opens
2. Use the encoder to select and enter the characters (press <ENC> for each character) for the new name
3. Select ‘Enter’ and press <ENC>
4. Restart the MS9500GL
5. Navigate to MENU/System/Computer Name. The new name will be displayed.
LCD Timeout
Set the length of time the display will stay on when not in use; choose from:
• 1 Minute, 3 minutes, 5 minutes, 10 minutes, Never
Factory Defaults
Use this feature to revert the Player to its factory settings.
Field Order
• Normal – Screen is ‘redrawn’ Odd horizontal lines first
• Reverse- Screen is ‘redrawn’ Even horizontal lines first. This setting may be required with some ‘non-
standard’ encoded video files.
Lock
Use this menu to assign a PIN number to the MS9500GL for security. This number will be required to use the
LCD control on reboot.
1. Press <ENC> over one of the four number in the display
2. Use the encoder to adjust the value and press <ENC>
3. Select OK and press <ENC> the display reverts to the main menu and the PIN is set.
Help
Use this menu to access useful information about the MS9500GL and to perform software updates when available.
• Version - Displays the current software version on MS9500GL
• Update – This function will allow for updates to the system and is controlled with a special PIN number
to prevent accidental use. It will start the boot loader program and should not part of normal use.
24 Rev. 1.26