Extron Electronics MS9500 HD FrEND Plus - Manual (Page 70)

MS9500GL HD FrEND Plus Chapter 12: Remote Control Protocols
Playlist Commands
ClearPlaylist <string>
This command clears all the entries from the playlist identified by <string>.
The Player will respond with:
OK or ERROR
ListAllPlaylists
Returns a list of all the playlists stored in the server.
The player responds with a list of Playlist commands as follows:
playlist <string1>
Where <string1> identifies a playlist. The list is terminated with an empty Playlist message.
Example:
Playlist “Left Screen”
Playlist “Right Screen”
Playlist
AddPlaylist <listname> <medianame> <0> <0>
Adds a clip identified by <medianame> to the playlist identified by <listname>.
Note: The <0><0> values are reserved for future development and must be entered with each command line.
The Player will respond with:
OK or ERROR
Example:
AddPlaylist “Left Screen” “Main screen intro.mpg” “0” “0”
AddPlaylist “Left Screen” “Main screen L.mpg” “0” “0”
The control system doesn’t need to terminate the playlist creation commands since the functionality is implied in
the command.
LoadPlaylist <Channel list> <string1>
Loads the playlist identified by <string1> onto the channels specified in <Channel list>. The clips specified in the
playlist must be available to all channels identified in <Channel list>.
The Player will respond with:
OK or ERROR
66 Rev. 1.26