Extron Electronics MVP 104GX User Guide - Manual (Page 24)

MVP 104GX Operation
Operation, cont’d
3-6
Figure 3-4 — MVP 104GX factory preset
window patterns
Active window selection
Press the Active window selection button repeatedly to cycle through all
active input windows (the green LED lights). An active window is
available only if its corresponding Input selection button has been
previously selected (indicated by the Input selection button’s green LED being lit).
The selected window, which has a green border, can then be configured. Cycling
past the fourth window turns off all LEDs, and all windows are deselected. If the
selected window has been modified, the window is deselected after 5 seconds, and
the LED turns off.
Menu and Next buttons with the LCD panel
Press the Menu button to access the menu system. Press the
Next
button to step through the submenus. The LCD panel
4
3
2
1
ACTIVE
NEXT MENU
Input 1
Input 1 Input 2 Input 3
Input 4
Input 2
Input 3 Input 4
Input 1 Input 1 Input 1
Input 2
Input 2 Input 2
Input 1 Input 2
Input 1 Input 2
Input 3
Input 3 Input 4
Input 1
Input 2 Input 3 Input 4
Input 1
Input 2 Input 3
Input 1
Input 2 Input 3
Input 4
Input 1
Input 2 Input 3 Input 4
Input 1
Input 2 Input 3 Input 4
Input 1
Input 3 Input 4
Input 3
Input 4
Input 1
Input 2
Input 3
Input 4
Input 1
Input 2
Input 3
Input 1
Input 2
Input 3
Input 4
Input 1
Input 2
Input 3
Input 4
Input 2
01
05
09
13
17
04
08
12
16
20