Extron Electronics MVP 104GX User Guide - Manual (Page 33)

MVP 104GX Operation
Exit
Menu
Confirm Reset submenu
Confirm the menu system reset by first holding down the Freeze button,
then press the Next button (the system advances to the System Resetting
Please Wait submenu), or press the Next button to return to the Background
Color submenu, or press the Menu button to exit the Confirm Reset
submenu and proceed to the Genlock menu.
System Resetting Please Wait submenu
After 2 seconds, the menu system defaults to the Default Cycle menu.
Genlock menu
Press the Menu button to advance to the Exit menu, or press the Next button to
proceed to the Horizontal Phase submenu.
Horizontal Phase submenu
The horizontal phase can be adjusted from 0 to
255 by rotating the Vertical sizing knob and
observing the output display (the default is
128), or press the Next button to proceed to the
Subcarrier Phase submenu, or press the Menu
button to exit the horizontal phase and proceed
to the Exit menu.
Subcarrier Phase submenu
The subcarrier phase can be adjusted from 0 to
255 by rotating the Vertical sizing knob and
observing the output display (the default is 128),
or press the Next button to return to the
Horizontal Phase submenu, or press the Menu
button to exit the Subcarrier Phase submenu and
proceed to the Exit menu.
Exit menu
Press the Next button to return to the Default Cycle menu, or press the Menu
button to return to the Picture Controls menu.
3-15
Genlock
not detected
Horizontal Phase
000 – 255
Subcarrier Phase
000 – 255