Extron Electronics MVP 104GX User Guide - Manual (Page 26)

MVP 104GX Operation
Operation, cont’d
3-8
in mind that sizing the window horizontally moves the right side
of the window only.
b . Horizontal sizing — Rotate the Horizontal sizing knob to adjust the
right side of the window.
c . Vertical positioning — Rotate the Vertical positioning knob to move
the top side of the selected window to a desired location, keeping in
mind that sizing the window vertically moves the bottom side of
the window only.
d . Vertical sizing — Rotate the Vertical sizing knob to adjust the bottom
side of the window.
3 . Press the Menu button to advance to the Window blanking menu. Press the
Next button to advance to the Blanking submenu. Using the Vertical sizing
knob, select <Manual>. Press the Next button to select the submenus, and
press the Active window selection button to select a window. The following
submenus remove unwanted information or noise from the top, bottom, left,
and right edges of a displayed image.
a . Top blanking — Rotate the Vertical sizing knob to increase or
decrease the top blanking from 0 to 16.
b . Bottom blanking — Rotate the Vertical sizing knob to increase or
decrease the bottom blanking from 0 to 16.
c . Left blanking — Rotate the Vertical sizing knob to increase or
decrease the left blanking from 0 to 16.
d . Right blanking — Rotate the Vertical sizing knob to increase or
decrease the right blanking from 0 to 16.
4 . If any of the windows requires further positioning/sizing, repeat steps 2 and
3.
5 . After optimizing the window image(s), save the configuration, as follows:
Press the Store button for 2 seconds. After the Store button LED lights green
and all eight User preset button LEDs flash amber, select a User preset button
to store the saved configuration. See the User presets section for a detailed
explanation.