Extron Electronics MVP 104GX User Guide - Manual (Page 50)

MVP 104GX Reference Information A-4
Specifications — MVP 104GX
Video
Gain ................................................ Unity
Differential phase error .............. 1.5º, 0 to 10 MHz
Differential gain error ................. 1.5%, 0 to 10 MHz
Video input and loopthrough
Number/signal type ................... 4 S-video, 8 NTSC/PAL composite video
Connectors ................................... 4 4-pin mini-DIN female ....... S-video
8 BNC female .......................... composite video
Minimum/maximum level(s) .... 2.0V p-p
Impedance .................................... 75 ohms
Vertical frequency ....................... 50 Hz to 60 Hz
Video processing
Encoder ......................................... 10 bit digital
Video output
Number/signal type ................... 1 S-video, 2 composite video
Connectors ................................... 1 4-pin mini-DIN female ....... S-video
2 BNC female ......................... composite video
Nominal level ............................... S-video ....................... 0.7V p-p Y, 0.288V p-p C (burst)
Composite video ..... 0.5V to 1V p-p
Impedance .................................... 75 ohms
Sync
Standards ...................................... NTSC 3.58, PAL
Audio
Gain ................................................ Unbalanced 0dB, balanced +6dB
Frequency response .................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive
(+19.5dBu input, +21dBu output, balanced/unbalanced)
S/N ................................................ >90dB, output +21dBu, balanced, at rated maximum output drive
Crosstalk ....................................... <-80dB @ 1 kHz
Stereo channel separation .......... >80dB @ 1 kHz
CMRR ............................................ >75dB @ 20 Hz to 20 kHz
Audio input
Number/signal type ................... 4 stereo, balanced/unbalanced
Connectors ................................... 4 3.5 mm captive screw connectors, 5-pole
Impedance .................................... >50 kohms unbalanced, 25 kohms balanced, DC coupled
Minimum level ............................. -10dBu for full power out
Maximum input level .................. +19.5dBu (balanced/unbalanced) @ stated %THD+N
Input gain adjustment ................. -15dB to +9dB, adjustable per input via RS-232 or front panel
Audio output
Number/signal type ................... 1 stereo, balanced/unbalanced