Extron Electronics MVP 104GX User Guide - Manual (Page 25)

MVP 104GX Operation 3-7
displays the selected menus and submenus. See the sections Menu Flowchart and
Using the Menu System.
Horizontal sizing
While the MVP 104GX is in the Default Cycle menu (see the Default Cycle
menu section), selecting an active input window and rotating the Horizontal sizing
knob sizes the selected window image horizontally. See the Position/Size window
menu section.
Vertical sizing
While the MVP 104GX is in the Default Cycle menu (see the Default Cycle
menu section), selecting an active input window and rotating the Vertical sizing
knob sizes the selected window image vertically. See the Position/Size
window menu section.
Horizontal positioning
While the MVP 104GX is in the Default Cycle menu (see the Default Cycle
menu section), selecting an active input window and rotating the Horizontal
positioning
knob positions the selected window image horizontally. See the
Position/Size window menu section.
Vertical positioning
While the MVP 104GX is in the Default Cycle menu (see the Default Cycle
menu section), selecting an active input window and rotating the Vertical
positioning
knob positions the selected window image vertically. See the Position/
Size window menu section.
Optimizing the Image
Before storing any user presets, adjust the input window images for optimum
contrast, brightness, tint, color, positioning, sizing, and blanking. Upon initial
power up of the MVP 104GX, factory pattern #01 in figure 3-4 is the default
windows preset. Using this preset, all four input windows can be optimized, as
shown in the following steps. See the flowchart in the Menu Flowchart section, and
see the Using the Menu System section for further details.
1 . From the Default Cycle menu, press the Menu button to advance to the
Picture Controls menu. Press the Next button to select the submenus, and
press the Active window selection button to select a window.
a . Contrast — Rotate the Vertical sizing knob to increase or
decrease the window contrast from 0 to 150 (default is 141).
b . Brightness — Rotate the Vertical sizing knob to increase or
decrease the window brightness from 0 to 50 (default is 23).
c . Tint — Rotate the Vertical sizing knob to increase or
decrease the window tint from 0 to 32 (default is 16).
d . Color — Rotate the Vertical sizing knob to increase or
decrease the window color from 0 to 100 (default is 80).
2 . Press the Menu button to advance to the Default Cycle menu, then press the
Active window selection
button to select a window to position or size.
a . Horizontal positioning — Rotate the Horizontal positioning knob to
move the left side of the selected window to a desired location, keeping