Franklin Fueling Systems TSSP-TMPTR Thermal Printer - Manual (Page 4)

4
To print a test page
1. Once the tank gauge is on, press the Main Menu
key on the LCD with the figure of a table
(Figure 10).
Figure 10: Select Main Menu
2. Press the arrow on the right side bar once.
Figure 11: Select Arrow Down
3. Press Diagnostics.
Figure 12: Select Diagnostics
4. Press Print Test Page.
Figure 13: Print Test Page
Printer Operation Notes
• On rare occasions, when printing excessively long
reports at high ambient temperature, the printer may
need to pause momentarily. Printing will resume
automatically after a few seconds.
• An open printer door or no-paper will generate an out-of-
paper alarm.
• If you are trying to print and the paper is spooling but no
text is printing, check paper roll orientation per Figure 7.
• The paper tear-bar is located at the top. Tear the paper
with a lifting motion (Figure 14).
Figure 14: Tear Paper with Lifting Motion