Franklin Fueling Systems TSSP-TMPTR Thermal Printer - Manual (Page 5)

5
To Setup a New Printer on a Console That Had No Printer
To physically install the printer, follow Printer Installation steps starting with step 9 on page 2.
The following steps illustrate how to program the T5 system through the computer connection when adding an internal
printer. Log on to the console using a web browser interface (Refer to FMS Operator’s Guide for further information).
From the System Screen, click on Setup
Select System Configuration
Select Modules Expected
A list of all potential modules will be displayed. The number next to the module represents the number of modules that
should be installed. When adding any module to the system, you must increase that module number by 1.
Click on the 0 next to Printer.