Aeromotive 18670 - A1000 CORVETTE STEALTH KIT - Manual (Page 3)

FIGURE 1-2
7. Once the collar has been released pull the cross over tube straight back, DO NOT TWIST. Twisting of the tube will
damage the small transfer tubes inside.
8. Repeat steps 3-7 for the other side.
9. Disconnect the EVAP Crossover pipe quick connect fitting at the top of each tank right above the crossover tube
connections and remove from vehicle.
10. Remove the fuel tank strap mounting bolts, tank straps and drop the tanks out of the car.
11. Remove the lock ring from the passenger side tank. The unit is spring loaded and will pop up once the ring is
removed. FIGURE 1-3
FIGURE 1-3