Aeromotive 18670 - A1000 CORVETTE STEALTH KIT - Manual (Page 8)

21. Now assemble the Siphon transfer hose. Use the figure below for reference. FIGURE 1-12
FIGURE 1-12
22. Tighten fitting 15103 into the straight hose end. Use some light oil on the 15103 to ease installation into the factory
quick disconnect inside the gas tank. Take some automotive wire or string and tie it to the 90 degree fitting. Lower
the complete hose assembly into the tank but leave the string/wire hanging out of the top of the tank. This will be used
to fish the hose out when the fuel pump is lowered in (due to tight tolerances, the unit and hose can not go in at
the same time). FIGURE 1-13
FIGURE 1-13