Aeromotive 18670 - A1000 CORVETTE STEALTH KIT - Manual (Page 7)

19. Now it’s time to assemble your new Aeromotive Stealth fuel pump! Use the figure below as reference to assembly
your fuel pump. FIGURE 1-10
FIGURE 1-10
20. Connect the positive and negative pump wires from the top plate to the pump. Cut the wires closest to the connector
on the leveling unit and attach the remaining wires to the ones provided on the Aeromotive top plate (it doesn’t matter
which wire goes where as it’s just a resistance reading). Once the unit is assembled it will look like this. FIGURE 1-11
FIGURE 1-11