Aeromotive 18670 - A1000 CORVETTE STEALTH KIT - Manual (Page 5)

14. Now that the block-off plug is installed, the unit is ready to be placed back in the tank. Reverse steps 13-10. This is all
that needs to be done to the passenger side tank.
15. Next you will start on the Driver Side tank. Remove the lock ring from the top of the tank. This unit is also spring
loaded and will pop out of the tank once the lock ring is removed. Note the orientation of the float arm. This must
be duplicated when placing the Aeromotive unit in the tank. Figure 1-6
FIGURE 1-6
16. Remove the fuel pump assembly from the tank. Be careful not to damage the float level arm during removal. Release
the fuel line from the fuel pump assembly by pressing the tab. FIGURE 1-7
FIGURE 1-7