Alpha Technologies PN-4 - Manual (Page 25)

3. Installation
25
031-103-B0-003 Rev. C © 2002 TM
Each battery contains a DATE CODE usually located near the positive (+) terminal of the battery. This date code
must be recorded in the maintenance log (
MAINTENANCE manual). If batteries other than those installed by Alpha are
used, consult the battery manufacturers’ documentation for date code type and placement.
YEAR: 2002
MONTH: (JUL) 07
0702
NOTE: Use a corrosion inhibitor (such as NCP-2) on battery terminals.
The accompanying drawings are for illustrative purposes only. Various types of batteries with different mounting
styles and hardware may be shipped with the system. ALWAYS refer to the battery manufacturer's specifications for
correct mounting hardware and torque requirements. During maintenance procedures, refer to the manufacturer's
specifications for the maintenance torque requirements.
Mounting hardware requirements may vary with battery manufacturers. Use only the hardware recommended by
your particular battery manufacturer.
3.5.2 Battery Identification
3.5.3 Battery Terminal Connections
Battery Cable, and
Crimp Connector to
next Battery
Battery Terminal
In-line Fuse Link
Washers & Bolt
Spacer
Figure 3-15; Alpha Cell Battery Date Code
Figure 3-16; In-Line Fuse Link Mounting