1 star lock security bolt, Figure 4-1; security bolt location, Figure 4-2; black clip in place – Alpha Technologies PN-4 User Manual
Page 33: Figure 4-3; retaining washer, Figure 4-4; security key (part number 647-089-10), Star lock security bolt, Pn series options
4. PN Series Options
33
031-103-B0-003 Rev. C
© 2002
TM
See section five, "Alpha Part Numbers" for PN Series options shown in this section.
The Star Lock Security Bolt kit comes factory installed when ordered with a new enclosure. The kit can also be added to
existing enclosures using the procedure below.
NOTE:
The Security Key is a special tool that must be ordered separately. Alpha recommends ordering security
keys for each maintenance crew.
1). Drill dimple located approximately half way down enclosure doors.
2). Place black clip over flange and align with factory-drilled hole in flange.
3). Place bolt into hole, apply retaining washer, and tighten with Security Key.
4.1
Star Lock Security Bolt
Figure 4-1; Security Bolt Location
®
Figure 4-2; Black Clip in Place
Figure 4-3; Retaining Washer
Figure 4-4; Security Key (Part Number 647-089-10)