1 introduction, Figure 1-1; enclosure as it arrives from alpha, Figure 1-2; packing label location – Alpha Technologies PN-4 User Manual
Page 9: Introduction
1. Introduction
9
031-103-B0-003 Rev. C
© 2002
TM
1.1
Introduction
To ensure operator safety:
•
Enclosures must be installed only by qualified personnel and in accordance with all applicable electrical
codes.
•
Use eye protection whenever working with batteries.
•
Use only sealed, lead-acid type batteries (gelled-electrolyte or equivalent, 65 Ah min.)
Unpacking and Inspection:
Carefully remove the enclosure from the shipping container. Verify that:
•
The correct unit was shipped (either Alpha PN-3 or PN-4 enclosure).
•
Ordered options have been included. (Refer to packing label details located on wooden pallet. See
figure 1-2)
NOTE:
Batteries are shipped separately.
Inspect the contents. If items are damaged or missing, contact Alpha Technologies and the shipping company immediately.
Most shipping companies have only a short claim period.
Figure 1-1; Enclosure as it Arrives from Alpha
Figure 1-2; Packing Label Location