Atec Agilent-E8802A - Manual (Page 17)

13
Table 12. Test Port Input (Trace Noise)
Description Specification Supplemental Information
Trace Noise
a
Magnitude
1 kHz IF Bandwidth < 0.002 dB rms
10 kHz IF Bandwidth < 0.005 dB rms
Trace Noise
a
Phase
1 kHz IF Bandwidth < 0.010° rms
10 kHz IF Bandwidth < 0.035° rms
a Trace noise is defined as a ratio measurement of a through or a full reflection, with the source set to 0 dBm.
Table 13. Test Port Input (Reference Level and Stability)
Description Specification Supplemental Information
Reference Level Magnitude
Range ±200 dB
Resolution 0.001 dB
Reference Level Phase
Range ±500°
Resolution 0.01°
Stability Magnitude
a
300 kHz to 3 GHz 0.02 dB/°C, typical
3 GHz to 6 GHz 0.04 dB/°C, typical
6 GHz to 9 GHz 0.06 dB/°C, typical
Stability Phase
a
300 kHz to 3 GHz
3 GHz to 6 GHz
6 GHz to 9 GHz
0.2°/°C, typical
0.3°/°C, typical
0.6°/°C, typical
a Stability is defined as a ratio measurement at the test port.