B&K Precision 9171-9174 - Manual User Manual

Page 123

Advertising
background image

111

PROGram:STEP:VOLTage

Description:

Configures/Queries the voltage setting for the selected

step (use PROGram:STEP command to select step).

For dual channel models, this will be for channel 1.

Syntax:

PROGram:STEP:VOLTage<SP><voltage>

PROGram:STEP:VOLTage?

<voltage> - 0 – max. rated voltage.

Example:

PROG:STEP:VOLT 1.234

Set 1.234 V as voltage setting for the selected step in

the program sequence.

Query:

PROG:STEP:VOLT?

Return String:

1.234

Format:

<NRf>


PROGram:STEP:VOLT2

Note:

For dual channel models only.

Description:

Configures/Queries the voltage setting for the selected

step (use PROGram:STEP command to select step) for

channel 2.

Syntax:

PROGram:STEP:VOLT2<SP><voltage>

PROGram:STEP:VOLT2?

<voltage> - 0 – max. rated voltage.

Example:

PROG:STEP:VOLT2 1.234

Set 1.234 V as voltage setting for the selected step in

the program sequence.

Query:

PROG:STEP:VOLT2?

Return String:

1.234

Format:

<NRf>


PROGram:TOTAl

Description:

Configures/Queries the total number of step numbers

for the program sequence.

Syntax:

PROGram:TOTAl<SP><number>

PROGram:TOTAl?

<number> - 2 -150 (max.)

Example:

PROG:TOTA 100

Setup a program sequence with 100 steps.

Query:

PROG:TOTA?

Return String:

30

Currently the sequence will have 30 steps for setup.

Format:

<NR1>

Advertising
This manual is related to the following products: