Dialight LSC3C4M3GEX SafeSite LED Linear Fixture - CID1 User Manual
Page 2
Document No: 9100-127-1402-99 Rev A
Page 2 of 7
1501 Route 34 South, Farmingdale, NJ 07727
Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.com
1: Introduction
This Linear LED light is designed for illumination of hazardous areas in industrial locations. It uses
the latest in solid state lighting technology for long life, low maintenance, and high efficiency.
The unique optical design focuses light downward to where it is needed, giving improved efficiency
over a conventional HID luminaire.
An internal, universal input, power-factor-corrected switch-mode supply allows it to be used from
any nominal 100V-277V, 50/60Hz AC supply without any variation in light output.
Models LSC3C4D2GEX, LSC3C4D3GEX, LSC3C4M2GEX and LSC3C4M3GEX
are suitable for use in the following locations:
•
HAZARDOUS LOCATIONS: CLASS I DIV 1 & 2 GROUPS C, D
Ta - Ambient Temp: -40 TO +65°C
Temp Rating – T5 (2 ft), T4A (4’)
•
SUITABLE FOR WET LOCATIONS
Note: Save these instructions for future reference.