Dialight LSC3C4M3GEX SafeSite LED Linear Fixture - CID1 User Manual
Page 5
Document No: 9100-127-1402-99 Rev A
Page 5 of 7
1501 Route 34 South, Farmingdale, NJ 07727
Tel: (732) 919-3119 Fax: (732) 751-5778 www.dialight.com
Figure 3.
3: Maintenance
•
To avoid personal injury, disconnect power to the light and allow the unit to cool down
before performing maintenance.
Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the
lens will void the warranty.
1) Perform visual, mechanical and electrical inspections on a regular basis. We recommend
routine checks to be made on a yearly basis. Frequency of use and environment should
determine this. It is recommended to follow an Electrical Preventive Maintenance Program
as described in NFPA 70B: Recommended Practice for Electrical Equipment.
2) The lens (Figure 4) should be cleaned periodically as needed to ensure continued
photometric performance. Clean the lens with a damp, non-abrasive, lint-free cloth. If not
sufficient, use mild soap or a liquid cleaner.
3) Inspect the outside of the luminaire housing to ensure that they are free of any obstructions
or contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if needed.
4) Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.
Sealing
Fittings
Anti-rotation
Screws