Dialight D464R13001 Vigilant L864 LED Based Red/Infrared Medium Intensity Beacon - Manual (Page 8)

Document No.
9100-127-1541-99 Rev A
November 17, 2011
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 Web: www.dialight.com
8 of 12
The only parts that are serviceable on the Beacon are the Light Engine and
Power Supply.
Replacement procedure for the Light Engine
Step 1 WARNING: Power to the Beacon must be removed prior to servicing.
Step 2 Unclamp the two latches holding the light engine down.
Step 3 Rotate the light engine back to its open position.
Step 4 Carefully pull the inline connector between the LED module and power
supply apart, and than unscrew the grounding strap from the light engine
to separate the two assemblies. Be careful not to lose the screw for the
ground strap.
Cable Connector
Ground Strap