MoTeC C185 - Manual (Page 11)

6 Introduction MoTeC
analysis of the data including maths calculations, while the vehicle is still
on the track.
Other telemetry features include: warning alarms, position of multiple
vehicles on a track map, broadcast data via DDE (Dynamic Data
Exchange) or via IP (Internet Protocol).
Note: The Telemetry option is required for the basic functionality. The
Remote Logging option is required in addition to the Telemetry option for
the Telemetry Analysis function.
High Definition Video
MoTeC brings true high definition to motorsport with its new HD Video
Capture System. The HD-VCS provides superior quality video and
numerous features designed specifically for the racing environment.
Features include:
• Genuine High Definition with 1080p @ 30 frames per second
• Automatic Start/Stop, eliminating the possibility of drivers forgetting to
turn it on
• 12 V power direct from the vehicle - no batteries to recharge
•
Live gauges automatically recorded on the video
• Over 5 hours of recording at 1080p
• Records to removable storage up to 32 GB
• Video can be played directly from the card
• Automatic CAN Synchronisation with data in i2 (available late 2013)
• Compact, lightweight recording unit
Lambda Measurement
PLM
The PLM Professional Lambda Meter measures the air fuel ratio over a
wide range of mixtures with fast response time. It is compatible with Bosch
LSU and NTK UEGO Lambda sensors and displays the Lambda readings
via the integrated display.
LTC/LTCD
The LTC Lambda to CAN modules provide accurate Lambda
measurements even when the exhaust gas temperature changes rapidly.
They are compatible with the Bosch LSU 4.9 Lambda sensor and transmit
Lambda readings via the CAN bus.