MoTeC C185 - Manual (Page 38)

33
MoTeC Configuration
At the bottom, up to 20 lines can be accommodated, with each line containing
up to 3 channel values at a time.
The label above each value can be changed to suit the channel assigned.
The 20 lines can be scrolled up or down using external buttons.
Similar to the top numeric displays, the bottom display can show up to four
override values.
Four Line Style
Where the four line style is chosen, it shows four lines of values at a time, with
up to three values per line.
The 20 lines can be scrolled up or down, 4 lines at a time, using external
buttons.
Alarms
Any alarms generated are displayed at the bottom of the display. The active
alarm message displays across the complete row, overriding all other values
until the alarm is acknowledged. To draw the driver's attention to the display,
it is recommended to activate a warning light.
The message can be defined as required and can include the current sensor
reading or the sensor reading when the alarm was triggered.
The alarms remain active until they are acknowledged, either by a driver
activated switch or automatically after a defined period of time.