Introduction, Remote displays, Pdms – MoTeC C185 User Manual
Page 12: Other devices
MoTeC
7
Introduction
Remote Displays
A remote display device may be connected to the C185 to allow display of any
value that the C185 calculates, such as lap times and warning alarm
messages.
The C185 supports D153, D175 displays which are connected via CAN.
PDMs
Power Distribution Modules are designed to replace conventional relays,
fuses and circuit breakers by providing electronically switched power to the
various electrical systems in the vehicle. This simplifies wiring and switch
requirements, while increasing reliability.
Full diagnostic information, including output currents and error status can be
transmitted via CAN to the C185.
Several models are available to suit vehicles with different complexity ranging
from 15 to 32 outputs and 12 to 23 inputs.
Other Devices
Many other devices can be connected to the C185. Contact your dealer for
advice.