Tool configurations – Climax PL2000 LATHE User Manual
Page 4
tooL ConfigurationS
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 4
Select your PL2000 in 5 easy steps.
1 Select a Machine Configuration
2 Select a Bolt Adapter
3 Select a Dial Indicator Assembly
4 Select a Spacer Assembly
5 Select a Tooling Pack
To configure the lathe you require, select the option you need in each step,
then contact your Climax representative.
1 Machine Configuration
PL2000 Portable Lathe, Electric 120 V, 60 Hz
31591
Standard PL2000 complete with 0.6 Hp (0.45 kW) electric motor, instruction manual,
and tool kit. Shipped in wooden crate. Net weight 99 lb (44.9 kg).
PL2000 Portable Lathe, Electric 230 V, 50 Hz
31593
As above, with 230 V, 50 Hz Motor.
PL2000 Portable Lathe, Pneumatic
31584
Standard PL2000 complete with 1.22 hp (.91 kW) pneumatic motor, instruction
manual, tool kit and pneumatic conditioning unit. Shipped in wooden crate.
Net weight 94 lb (42.7 kg).
PL2000 Portable Lathe, Pneumatic, CE Compliant
31584Ce
As above with CE approved pneumatic connection package with emergency air
shutoff valve assembly.
2 Bolt Adapter
Single bolt mount adapter
30572
Allows attachment of the PL2000 to the end of the shaft with one bolt.
Recommended for shafts under 3.75 inches (95.3 mm) in diameter.
3 Dial Indicator Assembly
Dial Indicator Assembly
30407
Attaches to tool head for accurately aligning the machine.
4 Spacer Assembly
Spacer assembly
31590
Spacer and counterweight assembly.
Allows the PL2000 to turn 5.0 - 9.0 inches (127.0 - 228.6 mm) diameter shafts.
Includes all mounting hardware.
5 Tooling Pack
Tooling Pack (not shown)
37810
One ½ inch x 3.0 inch (12.7 mm x 76.2 mm) grooving/plunging
tool bit, and one HSS ½ inch x 3.0 inch (12.7 mm x 76.2 mm)
finishing tool bit in storage case.
Turning bar
Feed shaft
Main body
Ring gear housing
Tool kit
Tool bit
Bar support
Planetary
housing assembly
Motor
(electric shown)
Hand crank