Climax LM6200 LINEAR/GANTRY MILL - Manual (Page 5)

TOOL CONFIGURATIONS
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 5
NOTE: Drawings are for reference only, are not to scale, and
may not represent actual product.
9. Z-Axis Slide Assembly
7 inch (177.8 mm) Travel 74100
10 Milling Head Swivel Assy
Milling Head Swivel Plate Assembly 63250
11 Hydraulic Power Unit
25 HP
200V-208V
65127
230V 65118
380V-415V 65128
460V 65126
575V 65129
12 Pendant Cable & Hose Assemblies
Hose and Cable Kit ¾ x 20 ft (609.6 cm) 65157
Hose and Cable Kit ¾ x 30 ft (914.4 cm) 65161
Hose and Cable Kit ¾ x 50 ft (1524.0 cm) 65164
Hose and Cable Kit ¾ x 100 ft (3048.0 cm) 65167
13 Stand Alone Feed Control
(Stand Alone Control Panel & Pendant with Cables)
NOTE: Not needed if using a Climax Hydraulic Power Unit
Voltage Cable Length Part Number
120V 20 ft (609.6 cm) 53398
50 ft (1524.0 cm) 53399
100 ft (3048.0 cm) 53400
230V 20 ft (609.6 cm) 53401
50 ft (1524.0 cm) 53402
100 ft (3048.0 cm) 53403
14 Electric Feed Assembly
NOTE: 230V Feeds not for use with Climax Hydraulic Power Units
Voltage Cable Length Part Number
120V 20 ft (609.6 cm) 64684
50 ft (1524.0 cm) 66310
100 ft (3048.0 cm) 66311
230V 20 ft (609.6 cm) 64743
50 ft (1524.0 cm) 66312
100 ft (3048.0 cm) 66313
15 Z-Axis Power Feed Adapter
Z-Axis Feed Adapter Kit - I Axis 40 Taper 64856
MANUAL FEED
HANDWHEEL
MILLING HEAD
ASSEMBLY
(Z-AXIS TRAVEL)
Z-AXIS ELECTRIC
FEED ASSEMBLY
Z-AXIS SLIDE
ASSEMBLY
SPINDLE DRIVE
MOTOR
X-AXIS ELECTRIC
FEED ASSEMBLY
Y-AXIS ELECTRIC
FEED ASSEMBLY
RAM AND CROSS
SLIDE ASSEMBLY
(Y-AXIS TRAVEL)
MAIN BED
(X-AXIS TRAVEL)