Setup and operation – Climax PM3000 OBS Three Axis Mills User Manual
Page 4
4 10/98
Look to Climax
Climax has over 7,000 portable metal-cutting
machines in service worldwide. Our years of
experience mean we probably have a machine
to solve your maintenance problem; if not, we
can modify an existing machine or design one to
fit your application. Our machines are designed
to get the job done for you accurately and save
you downtime in the process. Give us a call
today... we will be happy to talk with you about
your application.
The PM Series is designed to meet the
requirements of a variety of applications and can
be mounted in any position the job calls for - even
upside down. Electronic speed control provides
reduced spindle speeds for harder materials. Gear
box, spindle, quill, and vertical adjusting screw
assembly may be removed as a unit to sharpen or
replace the end mill.
Setup
Setup of the portable mill consists of positioning it
where you want it in relation to the work piece and
clamping or bolting it securely in place. Attach the
base directly to the work piece using the bolt-down
bosses provided or position it next to the work on a
fabricated frame. Mounting rigidity is very
important. The best way to mount the machine is to
weld attachment points right on the work piece.
This eliminates vibration, flexing and other sources
of chatter. If you are using an overhead frame for
mounting the machine upside down, be sure the
frame is rigid enough to handle the weight and side
torque forces of milling operations.
Operation
Operation of a PM Series mill is similar to any 3-
axis milling machine. Once the machine is rigidly
mounted, insert the proper cutter in the spindle,
and position for the cut. A rapid travel button allows
for faster milling head positioning. Feed control
varies with the power option. It is possible to
operate both the X and Y-axis feeds at the same
time. After positioning, the gibs should be adjusted
to provide a smooth, even cut. The hand crank
may be used for travel in all three axes.
A specially modified PM2000 with an air
motor.
Setup and Operation