Specifications – Climax PM4200 MILLING MACHINE User Manual
Page 2
US
Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SpecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Bed Length
29, 58 or 87 inches
736.6, 1473.2 or 2209.8 mm
Bed Travel (X Travel)
20, 49 or 78 inches
508.0, 1244.6 or 1981.2 mm
Cross Slide Travel (Y-Axis)
8 inches (Weldon)
203.2 mm
12
inches
(HSK)
304.8
mm
Spindle Reach from edge of bed
8.85 inches (Weldon)
224.8 mm
12
inches
(HSK)
304.8
mm
Tool Head Vertical Travel
3 inches (Weldon)
76.2 mm
4
inches
(HSK)
101.6
mm
No Load Spindle Speed
Weldon
Electric
230-525
RPM
Weldon
Hydraulic
282-696
RPM
Weldon Pneumatic
Up to 510 RPM
HSK Electric
Up to 800 RPM
HSK
Hydraulic
369-1006
RPM
HSK Pneumatic
Up to 1100 RPM
Spindle Size
0.75
inch
(Weldon)
19.1
mm
40A
(HSK)
Milling Head Gearbox Ratio
2.15:1 (Weldon Spindle)
6.25:1
(HSK
Spindle)
Electric
1:1
(HSK
Spindle)
Hydraulic
1:1
(HSK
Spindle)
Pneumatic
Spindle Power
3/4" Weldon Shank
120V or 230V Electric
1 HP
0.75 kW
Hydraulic Motor Assemblies
J Series with 24 inch (609.6 mm) hose and QD
Min Motor RPM @1 gpm (3.8 L/min)
Max Motor RPM @5.5 gpm (20.8 L/m)
65263 0.79 in
3
(13 cm
3
)
J
SERIES
116
696
65094 1.21 in
3
(19.8 cm
3
)
J
SERIES
81
469
65095 1.93 in
3
(31.6 cm
3
)
J
SERIES
46
283
Pneumatic
*
1.55
HP
1.15
kW
HSK Spindle
120V or 230V Electric
3.5 HP
2.6 kW
Hydraulic
J Series with 24 inch (609.6 mm) hose and QD
Max Motor RPM @1 gpm (3.8 L/min)
Min Motor RPM @5.5 gpm (20.8 L/m)
65094 (1.21 in
3
(19.8 cm
3
)
J
SERIES)
175
1009
65095 (1.93 in
3
(31.6 cm
3
)
J
SERIES)
99
606
68455 Pneumatic Right Angle *
1.55 HP
1.15 kW
68584 Pneumatic Direct Drive *
1.35 HP
1.01 kW
* Air motor requires 32 FT3/min (0.9m3/min) at
90 PSI
550 kPa