Climax VM1600 GATE VALVE GRINDING & LAPPING - Manual (Page 5)

Feb-10 / VM1350-1600 Gate Valve Grinding & Lapping Machine Brochure.doc Page 5 of 10
Model VM1500 (Range 3”-20” (80 mm-500 mm)Diameter)
P/N Description
Gate Valve Grinder VM1500S
Nominal working dia 3“ to 20“ (80 mm to 500 mm)
Submerging depth 31“(800 mm).
Included Components:

3 sets (5 arms/set) of planet arms 1.2” (30 mm), 2.4”
(60 mm), 4.5” (115 mm) in length.

A set of 4 planet wheels 3.9”(100 mm), 5.3”(135 mm),
8.7”( 220 mm) 15.0”(380 mm) in diameter.

2 sets (5 discs/set) of grinding discs 2.0”(50 mm) & 3.2”
(80 mm) in diameter.

1 set of clamping equipment for mounting the machine
on valves with and without top flange.
 Start up set of abrasives grain 100 und 500.

1 set (5) of CBN grinding disks 2.0”(50 mm) diameter.
 1 set of tooling.

Carrying cases with foam inlet for the machine and the
accessories.
440-00S-S32 VM1500S with electric motor 230 V / 50 Hz
440-00S-S33 VM1500S with pneumatic motor
440-00S-S34
VM1500S with electric 230V / 50 Hz and pneumatic
motor
440-00S-S35 VM1500S with electric motor 115 V / 60 Hz
440-00S-S36 VM1500S with electric 115V / 60 Hz and pneumatic
motor
Gate Valve Grinding and Lapping machine VM1500
Machine like VM1500S but with additional lapping equip-
ment:

3 sets (5 discs/set) of lapping disks 1.2” (30 mm),
2.0”(50 mm) & 3.2”(80 mm) in diameter.

Lapping paste 10 and 30 µm.
440-00S-S22 VM1500 with electric motor 230 V / 50 Hz
440-00S-S23 VM1500 with pneumatic motor
440-00S-S24 VM1500 with electric 230V / 50 Hz and pneumatic motor
440-00S-S25 VM1500 with electric motor 115 V / 60 Hz
440-00S-S26 VM1500 with electric 115V / 60 Hz and pneumatic motor
Pneumatically driven machines also require the accessory pneumatic motor maintenance kit