Tool configurations – Climax FF7200 FLANGE FACER User Manual
Page 3
tool conFigurationS
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 3
The FF7200 can be configured in several ways to meet your specific machining needs.
Select option 1
for
single pointing only
Select option 2
for
milling only
Select option 3
for
BOTH milling and single pointing
option 1:
To configure your FF7200 for Single-Point Machining Only
To configure your machine, please follow these steps.
1 Select a Base Package
2 Select a Feed Assembly
3 Select a Drive Motor Assembly
4 Select a Hydraulic Motor
5 Select an Optional Grinder Attachment
6 Select a Hydraulic Power Unit
7 Select a Turning Arm Assembly
8 Select a Counterweight Assembly
9 Select a Chuck Assembly
10 Select a Shipping Container
1 Base Package
Rotary table, tool kit, operator's manual, .
58184
2 Feed Assembly
Pneumatic Feed Assembly with Remote Air Control 58671
3 Drive Motor Assembly
Pneumatic Motor and Drive Assembly
58186
(Pneumatic drive system includes: Pneumatic
motor w/fittings and mount, rotary union,
hoses, feed trip valve, cam, and pneumatic
conditioning unit with low pressure drop out.)
Hydraulic Drive Assy w/ Feed Conditioning Unit 58180
- DOES NOT INCLUDE MOTOR
(Hydraulic drive system includes: Hyd motor
mount, hoses, fittings, rotary union, feed trip
valve, cam, and feed pneumatic conditioning unit.)
4 Hydraulic Motor
(If Hydraulic drive is selected in step 3)
Rated at 10 gpm, 1200 PSI
Hydraulic Motor, 11.9 cu in (195.0 cu cm),
67730
6 - 31 RPM
Hydraulic Motor, 14.9 cu in (244.2 cu cm),
69216
3.6 - 18 RPM
Hydraulic Motor, 18.7 cu in (306.4 cu cm),
69217
2.8 - 14 RPM
Hydraulic Motor, 24.0 cu in (393.3 cu cm),
69218
2.2 - 11 RPM
Hydraulic Motor, 29.8 cu in (488.3 cu cm),
69219
1.8 - 9 RPM
* Multiple units may be ordered.
5 Optional Grinder Attachment
Grinding Attachment for Pneumatic Table Drive Motor 62537
Grinding Attachment for Hydraulic Table Drive Motor 62570
Grinder Rotational Gearbox
Slow Rotation Gearbox for Pneumatic Motor 62568
(gear ratio 160:1)
Slow Rotation Gearbox for Hydraulic Motor
62538
(gear ratio 160:1)
Optional Grinder Attachment, cont'd
Grinder Tooling
Grinding Wheel 1.5 in (38.1 mm), CBN 125 Grit 62633
Grinding Wheel 2.25 in (57.2 mm), CBN 125 Grit 62634
6 Hydraulic Power Unit
For Hydraulic Drive Machine
Single Pump (single pointing only):
HPU 230V, 10 HP (7.5 kW) Single pump
63264
HPU 380V, 10 HP (7.5 kW) Single pump
63265
HPU 415V, 10 HP (7.5 kW) Single pump
63266
HPU 460V, 10 HP (7.5 kW) Single pump
63267
HPU 575V, 10 HP (7.5 kW) Single pump
63268
Single Pump with Air (for use with grinder):
HPU 230V, 10 HP (7.5 kW) Single pump with Air 62759
HPU 380V, 10 HP (7.5 kW) Single pump with Air 62760
HPU 415V, 10 HP (7.5 kW) Single pump with Air 62761
HPU 460V, 10 HP (7.5 kW) Single pump with Air 62762
HPU 575V, 10 HP (7.5 kW) Single pump with Air 62763
Pendant Cable, Hose
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62799
20 ft (6.1 m)
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62800
30 ft (9.1 m)
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62801
50 ft (15.2 m)
0.5 in (12.7 mm) Hose and Pendant Cable Assy, 62802
100 ft (30.5 m)
7 Turning Arm Assembly
Turning Arm Assembly with Single Point Tool Head 57873
Milling Arm Assembly w/ Single Poiint Tool Head 62577
8 Counterweight Assembly
Counterweight Assembly
58063
Counterweight Milling Arm Assembly
62514
9 Chuck Assembly
ID Chuck Assembly
57877
10 Shipping Container
Wooden Crate for ID Mount Machine
58358
Metal Container for ID Mount Machine
59304