Climax FF1000 FLANGE FACER - Manual (Page 3)

Accessories
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 3
35178 FF1000 flange facer with
8 inch (203.2 mm) bell
100 rpm includes spindle, quill,
alignment plate, quill clamp, drive
gear box, 1.22 hp (0.91 kW) air
motor, air conditioning unit, 8 inch
(203.2 mm) OD mounting bell
(p/n 30718, also sold separately)
with setup hardware, facing head
assembly, dial indicator, 1 ⁄
4
inch
and 3 ⁄
8
inch HSS tool bits, tool
kit, and wooden storage crate.
Air motor requires: 90 psi (620
kPa) at 30 ft 3 /min (.85 m 3 /min) at
maximum power. Vertical feed is
manual. Spindle free speed 96
rpm max. Spindle provides 42.5
rpm and 105 ft-lb (142.7 N•m)
torque at rated hp.
1 inch (25.4 mm) travel.
35179 FF1000 flange facer with
12 inch (304.8 mm) bell
100 rpm. Same as p/n 35178
above but with 12 inch (304.8
mm) bell (p/n 30996, also sold
separately).
35180 FF1000 flange facer with
8 inch (203.2 mm) bell
200 rpm. Same as p/n 35178
above except spindle free speed
is 192 rpm max. Spindle provides
98.4 rpm and 52.5 ft-lb (71.4
N•m) torque at rated hp.
1 inch (25.4 mm) travel.
35181 FF1000 flange facer with
12 inch (304.8 mm) bell
200 rpm. Same as p/n 35180
above but with 12 inch (304.8
mm) bell.
ff1000 flange facing module
includes OD mounting bell with setup
hardware, facing head assembly,
1 ⁄
4
and 3 ⁄
8
inch HSS tool bits.
30718 FF1000 flange facing module,
8 inch (203.2 mm) diameter.
Mounts onto flanges 4 to 8 inch
(101.6 to 203.2 mm) in diameter.
Faces 0 to 8 inch (0 to 203.2 mm)
diameters. Radial feed is manual
or automatic. Radial feed speed
is variable, up to 0.035 inches/rev.
(0.89 mm/rev.) Net weight 23 lbs
(10.5 kg).
30996 FF1000 flange facing module,
12 inch (304.8 mm) diameter.
Mounts onto flanges 8 to 12
inches (203.2 to 304.8 mm) in
diameter. Faces 0 to 12 inch (0
to 304.8 mm) diameters. Radial
feed is manual or automatic.
Radial feed speed is variable, up
to 0.035 inches/rev. (0.89 mm/
rev.) Net weight 29 lbs (13.2 kg).
replacement tool bits
One of each tool listed below is
included with each flange facing
module.
31863 Tool bit, roughing
3 ⁄
8
inch square x 1.3 inches long
31854 Tool bit, finishing
3 ⁄
8
inch square x 1.3 inches long
11863 115V Power vertical feed module
Module mounts securely to the
quill support shaft to automatically
feed the machine axially. Feed
rate is adjustable from 0.04 to
1.6 inches (1.0 to 40.6 mm) per
minute. Values are theoretical
and may vary in actual use.
10993 Tool kit
Complete set of tools for the
FF1000 Flange Facer. Tool kit is
included with complete machine
packages.
10991 Small flange adapter plate
Attaches to bottom of 8 inch
(203.2 mm) diameter mounting
bell. Allows attachment of
mounting bell to 2 to 4 inch (50.8
to 101.6 mm) diameter flanges.
Net weight 11 lbs (5.0 kg).
NOTE: Drawings are for reference only, are not to scale, and may not represent actual product.
no. Description no. Description