Climax FF3000 FLANGE FACER - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPECIFICATIONS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Flange Facing Diameter 1.5 - 12.0 inches 38.1 - 304.8 mm
Beveling Diameter 2.0 - 7.0 inches 50.8 - 177.8 mm
(w/ optional beveling head)
Pipe Facing Diameter
2.0 - 7.0 inches 50.8 - 177.8 mm
(w/ optional beveling head)
ID Mounting Diameter
1.5 - 6.86 inches 38.1 - 174.2 mm
Maximum radial travel of Chuck Ramps 0.23 inches 6 mm
Feed rate (reversible, variable) 0 to 0.025 inches/rev. 0 to 0.635 mm/rev.
Power, Pneumatic 0.79 Hp 0.59 kW
Power Requirement 36 cfm, 90 psi 1.02 m 3 /m, 629 kPa
Operating Weight 35 lbs 15.9 kg
Shipping Weight (Machine w/ Facing Head Only) 102 lbs 46.3 kg
Shipping Weight (Machine w/ Beveling Head Only) 95 lbs 43.1 kg
Shipping Weight (Machine w/ Facing & Beveling heads) 109 lbs 49.4 kg
Shipping Dimensions 32 x 21 x 11 inches 812.8 x 533.4 x 279.4 mm
Draw bar knob
Feed adjust
Swivel fitting
Ball valve
Main body
Clamp blade set
Chuck
Facing head
Pneumatic motor
Configure your FF3000 in 2 easy steps.
To configure your FF3000 Flange Facer:
1 Select a Base Package
2 Select a Facing Head
To configure the flange facer you require, simply select the option
you need in each step, then contact your Climax representative.
1 Base Package
Main machine with .79 Hp (0.59 kW) 49592
pneumatic motor with air conditioning unit,
tooling, chuck, and chuck block set. Unit
comes packaged in a durable molded container.
2 Facing Head
12 inch (304.8 mm) facing head 35222
7 inch (177.8 mm) beveling head 34980
Optional Facing/Beveling Bits:
Facing bit 33141
Beveling bit 37.5 degrees 33136
Roughing tool bit 31867
Finishing tool bit 31858
5 degree chamfer tool bit 33315
Optional Facing/Beveling Heads:
Beveling head 7 inches (177.8 mm) 34980
Beveling head 12.75 inches (323.9 mm) 35439
Facing head, 1.5 - 12 inch (38.1 - 35222
304.8 mm) diameter
Facing head, 1.5 - 19 inch (38.1 - 34936
482.6 mm) diameter
Tool Configurations