Climax BB5000 Adjustable Range Facing Head - Manual

Broad facing diameter range
Facing range is 2.5 - 18 inches (63.5 -
457.2 mm).
Easy, flexible setup and operation
■ The adjustable facing head will face
in either direction.
■ Switch from boring to facing in a
matter of minutes.
■ Quickly mount the facing head
anywhere on the boring bar while
the bar is still mounted in the bore;
saves time and helps get your job
done quickly.
Useable in tight, restricted spaces
■ Unique design allows you to
perform facing operations in tight
restricted spaces.
■ Minimum swing diameter using the
9 inch (228.6 mm) lead screw is 10
inches (254 mm).
■ Shorten the lead screw to reduce
the minimum swing diameter to 9
inches (228.6 mm).
■ System includes a set of 9 inch
(228.6 mm) and 12 inch (304.8
mm) lead screws.
(See diagrams on reverse side for
minimum and maximum swing
specifications.
Features automatic radial feed and
instant reverse
■ Automatic radial feed is provided by
a trip-activated feed mechanism that
advances 0.01 inches (0.25 mm) per
revolution.
■ Feed direction can be safely stopped
or reversed instantly while the unit is
operating, without reaching into the
rotating equipment.
Technical Information:
■ Facing head mounts anywhere on
the bar.
■ Radial feed with dual lead screws
and single point tool holder.
■ Includes one each 0.5 inch (12.7
mm) carbide and HSS square tool
bits.
■ Shipping weight: 32 lbs. (15 Kg)
■ Container dimensions: (L, W, H)
20 x 10 x 11 inches (508 x 254
279.4 mm)
B B 5 0 0 0 A d j u s t a b l e R a n g e F a c i n g H e a d A c c e s s o r y
B r i n g i n g t h e s o l u t i o n t o y o u .
F E A T U R E S • T E C H N I C A L D A T A
For the BB5000 Portable Boring Machine
Portable Machine Tools, Inc.
®
BB5000 facing head, two single arm bearing mounts, mechanical axial feed, rotational
drive unit,and 120V electric drive motor with variable speed controller in Climax's
assembly shop repairing a large weldment. The face needed to be cut flat, the bore
opened up, and a new counter bore added for clearance of a part being assembled
through the weldment. Notice that the single arm bearing mounts are mounted at a
10-degree angle off of square from the bar. The Climax-patented spherical bearing
mounts ensure proper alignment and extremely fast setup time, and prevent the drive,
bearings and bar from binding up in an off-square setup.
Ask us about the Climax Adjustable
Facing and Grooving Head accessory
to add even more capability to your
BB5000 Portable Boring Machine