Climax BB5000 Drilling Accessories - Manual (Page 4)

criTerion Boring HeADs
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 4
59767 3 inch (76.2 mm) Diameter Criterion CB-203D Boring Head Kit
59759 Additional CFX- 750 ¾ x 8 inch (19.1 x 177.8 mm) Long
Vertical Hole Boring Bar to cut to length
60244 Optional special order CFX- 750 ¾ X 4.75" Long
Vertical Hole Boring Bar
59765 Insert CPMT- 3 (2.5) 1-1A C6 80 inches (2032.0 mm)
59768 4 inch (101.6 mm) Diameter Criterion CB-204D Boring Head Kit
59760 Additional CFX- 1000 1 X 10 inch (25.4 x 254 mm) Long Vertical Boring Bar
to cut to length
60245 Optional special order CFX-1000 1 X 5.31 inch (25.4 x 134.9 mm) Long
Vertical Hole Boring Bar
59765 Insert CPMT-3 (2.5) 1-1A C6 80 inches (2032.0 mm)
criterion 3 and 4 inch (76.2 and 101.6 mm )diameter boring heads for blind hole boring with the BB5000
Boring Bar
criterion 3 (76.2 mm) Boring Head Kit - #4 Morse Taper
The 3 inch (76.2 mm) Boring Head set uses ¾ inch (19.1 mm) diameter Boring Bars in both the cross-hole and the two vertical holes and
can bore blind holes from 1 to 5-
1 ⁄
8
inch (25.4 to 130.2 mm) diameter with the CFX Vertical Hole Boring Bar, and from 4- 15 ⁄
16
to 11 inches
(125.4 to 279.4 mm) with the CHB Cross-Hole Boring Bar.
The standard ¾ inch (19.1 mm) CFX Vertical Hole Boring Bar is 8 inches (203.2 mm) long and can bore as deep as 6-¼
inches (158.8 mm). The special order short ¾ inch (19.1 mm) CFX Vertical Boring Bar is 4-¾ inches (120.7 mm) long and can bore as
deep as 3 inches (76.2 mm) (Holes over 3-¼ inches (82.6 mm) in diameter are only limited by the rigidity of the boring set up, as the bor-
ing head can follow the tool into the bore.)
criterion 4 inch (101.6 mm) Boring Head Kit #4 Morse Taper
The 4 inch (101.6 mm) Boring Head set uses 1 inch (25.4 mm)
diameter Boring Bars in both the cross-hole and the two verti-
cal holes and can bore blind holes from 1-¼ to 7 inches (31.8
to 177.8 mm)in diameter with the CFX Vertical Hole Boring
Bar, and from 5-
5 ⁄
8
to 13- 7 ⁄
16
inches (142.9 to 341.3 mm) with
the CHB Cross-Hole Boring Bar.
The standard 1 inch (25.4 mm) CFX Vertical Hole Boring Bar
is 10 inches (254.0) long and can bore as deep as 7-¼ inches
(184.2 mm).
The special order short 1 inch (25.4 mm) CFX Vertical Boring
Bar is 5.31 inches (134.9 mm) long and can bore as deep as
2½ inches (63.5 mm). (Holes over 4-¼ inches (108.0 mm) in
diameter are only limited by the rigidity of the boring set up, as
the boring head can follow the tool into the bore.)