Climax BB3000 LINE BORING MACHINE - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SpecificationS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring Bar Diameter 1.25 inches 31.8 mm
Boring Diameter 1.5 - 5.0 inches 38.1 - 127 mm
Boring Stroke, Max 10 inches 254 mm
Power Options
1-speed Reversible Elec: up to 86 free speed bar RPM 0.6 Hp 0.45 kW
1-speed Electric: 92 free speed bar RPM 1.0 Hp 0.74 kW
2-speed Electric: low: up to 88 free speed bar RPM 1.0 Hp 0.74 kW
high: up to185 free speed bar RPM
Mounting Options
Double Arm, Universal
Rotational Drive Unit 7.5:1 gear ratio reduction
Set-Up Cones (included with Base Unit) 1.5 - 5 inches 38.1 – 127.0 mm
Feed
Feed Type Mechanical Mechanical
Feed Rate per revolution 0 – 0.018 inches/rev. 0 – 0.46 mm/rev.
Measures:
Typical Machine Ship Weight 240 lbs 109 kg
(Typical machine with double arm mounts, set-up cones & electric motor)
Approximate Boring Bar Ship Weight
50 lbs 22.7 kg
(Standard 1- 1 /
4
inch (31.8 mm) bar, 72 inches(1828.8 mm) long. Includes metal shipping container.)
Typical Shipping Dimensions (Shipped in 2 containers)
Machine W, D, H 34 x 20 x 20 inches 864 x 508 x 508 mm
Bar 72 inch (1828.8 mm) W, D, H 75 x 7 x 7 inches 1905 x 178 x 178 mm
Here’s how to determine the length of the boring bar you will require:
NOTE: Maximum recommended unsupported bar length (between bearing supports) is 18 inches (457.2 mm)
18.8 (477.5)
6.69 (169.9)
3.75 (95.3)
16.28 (413.5) Elec CE
12.53 (318.3) Elec US
9.83 (249.7) Pneumatic
2.38 (60.5)
7.07
(179.6)
2.94
(74.7)
0.75
(19.1)
10 (254)
max feed
stroke
‘X’
Workpiece
Ш1.25 (Ш31.8)
2.5 (63.5)
12.25 (311.2) Max
9.75 (247.7) Min
Max unsupported bar
length 18 (457.2)
7.25 (184.2) Max
4.75 (120.7) Min