Climax BB4500 LINE BORING MACHINE - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SpecificaTionS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Boring Bar Diameter
Standard 1.75 44.5
Optional 1.25 31.8
Boring Diameter
Standard 2 - 10 50.8 - 254
Optional (minimum) 1.5 38.1
Boring Stroke
Standard 12 304.8
Optional 24 609.6
Power Options
Electric: up to 145 free speed bar RPM 1.3 Hp 1.0 kW
Electric: up to 168 free speed bar RPM 2.3 Hp 1.7 kW
Hydraulic: up to 148 free speed bar RPM 3.9 Hp 2.9 kW
Pneumatic: up to 120 bar free speed RPM 3.0 Hp 2.2 kW
Mounting Options
Single arm. double arm, and universal mounts available.
Rotational Drive Unit 4:1 worm gear reduction
Feed mechanical, reversible
Feed Rate (per revolution) 0 - 0.018 0 - 0.46
Set-Up Cones
Standard 2 - 10 50.8 - 254
Optional 1.5 - 3.25 38.1 - 82.5
Measures
Ship Weight (approx.) for typical machine 406 lbs 185 kg
(typical machine with single arm mounts, universal
mounts, set-up cones, electric motor, and metal shipping container)
Ship Weight (approx.) of boring bar
1.03 lbs/inch 0.019 kg/mm
(standard 1.75 inch (44.5 mm) bar, including metal shipping container)
Shipping Dimensions for typical machine (Shipped in 2 containers, 3 containers for hydraulic power unit option)
Machine W, D, H 47 x 26 x 16 1194 x 661 x 407
Bar 72 inch (1829 mm) W, D, H 74.5 x 5 x 5.5 1893 x 127 x 140
HPU (5 Hp) W, D, H 29 x 26 x 44 737 x 661 x 1118
Length of boring bar required =
X + 27 1/2 inches (699mm) + required stroke.
Cutting should be performed within 9 inches (229 mm) of a
bearing support. Maximum recommended unsupported bar
length between any two bearings is 36 inches (914 mm).
The space between the back of the bearing mounting
plate and the face of the bore must be at least 3 inches
(76 mm) for set-up cone removal. If the bore has a
shoulder or boss, increase the height of the spacer plate
and the length of the bar accordingly.
Here's how to determine the length of the boring bar you will require