Fig. 3 – CEMB USA SM915 User Manual

Page 11

Advertising
background image

11

3. TRASPORTO

• Lo smontagomme deve essere trasportato nell'imballo originale e mantenuto nella posizione indicata sull'imballo stesso.

• Lo spostamento della macchina imballata deve essere effettuato inforcando con un carrello elevatore di adeguate

capacità, nei punti indicati dalla figura 3.

3. TRANSPORT

• The tyre changer must be transported in its original packaging and kept in the position shown on the package itself.

• The packaged machine may be moved by means of a fork lift truck of suitable capacity. Insert the forks at the points shown
in figure 3.

3. TRANSPORT

• Le démonte-pneus doit être transporté dans son emballage et maintenu dans la position indiquée sur l’emballage même.

• La machine emballée doit être déplacée sur les fourches d’un chariot élévateur d’une capacité

appropriée, enfilées aux points indiqués sur la figure 3.

3. TRANSPORT

Das Reifenmontiergerät darf nur in seiner Originalverpackung und in der auf der
Verpackung angegebenen Position transportiert werden.

Die verpackte Maschine darf nur mit einem dazu geeigneten Gabelstapler angehoben und
transportiert werden, wobei die Gabeln an den in
Abb. 3 angegebenen Punkten einzuschieben sind.

Fig. 3

4. DISIMBALLO

Togliere il cartone di protezione e il sacchetto in nylon

Assicurarsi dell’integrità dell’apparecchio controllando che non vi siano parti visibilmente danneggiate o
mancanti facendo riferimento alla fig. 1
In caso di dubbio non utilizzare la macchina e rivolgersi al proprio rivenditore.

4. UNPACKING

Remove the protective cardboard and the nylon bag.

Check that the equipment is in perfect condition, making sure that no parts are damaged or missing. Use fig. 1 for
reference.
If in doubt do not use the machine and contact your retailer.

4. DEBALLAGE

Enlever le carton de protection et le sac en nylon.

Contrôler qu’il n’y ait pas de parties visiblement endommagées ou manquantes en se référant à la figure 1.

En cas de doute, ne pas utiliser la machine et s’adresser au revendeur autorisé.

4. AUSPACKEN DER MASCHINE

Schutzkarton und Plastikbeutel entfernen.

Kontrollieren, ob das Gerät intakt ist, ob keine sichtbaren Beschädigungen vorhanden sind oder Teile fehlen, siehe dazu
Abb.1.

Im Zweifelsfalle die Maschine nicht benützen und den Verkäufer benachrichtigen.

Kg.220

Advertising