CEMB USA C75SE (B) User Manual
Page 18
I 0292 - 18
I 0292 - 19
GB
GB
5.5.1 - INDICATION OF EXACT CORRECTION WEIGHT POSITION
It is possible use this function in the event of correction of the external side using an adhesive weight
placed inside the rim.
This function allows cancelling approximations in the mounting of counterweights with consequent
reduction of the residual unbalance.
- Press button
from the Measurements screen.
- Pull out the rim distance+diameter gauge
in position A, figure 8. Approach of the weight to the
correction position is indicated by a moving coloured arrow [ ].
- When a fixed arrow [ ] is reached, rotate the wheel to correction position (FI or FE) and apply the
counterweight by turning the tip of the gauge towards the outside, into the position
in which the pin-
cers touches the wheel. Compensation is made for the fact that the weight application position is no
longer at 12 o’clock (fig. 11).
When the acoustic signal is enabled (see
ACOUSTIC SIGNAL
), the reaching of a fixed arrow [ ] is
accompanied by a “beep”.
Fig. 11