CEMB USA C75SE (B) - Manual (Page 33)

I 0292 - 32
I 0292 - 33
1 2 3 4 5
GB
GB
Fig. 14
11 - SETTING MONITOR COLOURS
a) Remove the clip-fitted control panel by
leve ring on the short side (caution: do not
damage the flat connection cable)
The window on the base provides access to the
monitor control buttons for colour settings
b) LUMINOSITY: Press 1 or 2 and set
~ 80% (always with 1 & 2)
c) CONTRAST: Press 4-5 and set 100%
Press 3 (MENU) to exit
d) COLOURS: Press 3
- Press 4 twice selecting
in the window
R
G B
- Press 3 until "USER" is selected
- Press 2 and set 100% with 4 - 5
on the blue bar
- Press 2 again and set 100%
on the green bar
- Press 2 again and set 100%
on the red bar
NOTE: this description is valid for the DAEWOO 15” monitor, code 801100164. For different models,
make adjustments so that “red” on the monitor is as similar as possible to the CEMB “red” on the base.