CEMB USA C75SE (B) - Manual (Page 31)

I 0292 - 30
I 0292 - 31
GB
GB
Err. 20 The wheel comes to a halt before
completing positioning correctly.
1. Make sure that the wheel to be balanced is at least 10”
in diameter.
2. Verify the correct setting of wheel dimensions on
screen.
3. Verify belt tautness.
4. For wheels less than 12” in diameter wheels: disenable
the
eccentricity measurement procedure
Err. 30 Clock error Replace the computer board.
Err.40/
Err.41/
Err.42/
Err.43
Eccentricity graph plotting proce-
dure error.
Perform a new eccentricity measurement.
Err.45/
Err.46/
Err.47/
Err.48
Eccentricity graph value display
readout error.
Perform a new eccentricity measurement.
Err.50/
Err.51/
Err.52/
Err.53
Eccentricity graph current value
cursor plotting procedure error.
Perform a new eccentricity measurement.
CAUTION