CEMB USA K10 (D) - Manual (Page 8)

I 0215 - 8 GB
5 - INDICATION AND USE OF THE WHEEL BALANCER
5.1 - DOUBLE OPERATOR PROGRAM
This program allows memorizing the dimensions of two types of wheels. Thus two operators can work
simultaneously on two different cars using the same balancing machine. The system memorizes two
programs with various preset dimensions.
1 - Press to select operator (1 or 2). Selection is confirmed by panel-mounted Led.
2 - Input the dimensions (see PRESETTING WHEEL DIMENSIONS )
3 - Press to perform balancing normally
With program 1 or 2 is called for subsequent balancing operations without having to newly enter
the dimensions.
5.2 MANUAL PRESETTING OF WHEEL DIMENSIONS
5.2.1 - Standard wheels
Fig. 5
- Preset distance “a” for the inside of the wheel from the machine
- Set the rated width, which is generally indicated on the rim, or measure
width “b” using the compass gauge supplied..
- Preset the nominal diameter “d” indicated on the tyre.
readout