CEMB USA K10 (D) - Manual (Page 9)

cm
Fig. A Fig. B
I 0215 - 9 GB
- Wheel ALU-S
- Measure the dimensions as shown in the following diagram
Fig. 6
PRESETTING:
5.2.2 - SETTING WITH GAUGE EXTENSION ( OPTIONAL )
Note: when dE is not set, dE = 0.8 dI is automatic
The extension increases the gauge distance measurement field by 6 cm (Fig. A) and allows distance
measurement even when the rim has a special profile (Fig . B).
Proceed as indicated below:
- Fit the extension on the distance gauge.
- Measure the distance as already described.
- Having read value “a” on the dial, reset the gauge to 0 and set by hand the value “a + 6”
- Manually set the diameter and the width.
0 gauge
Extension +6