AAON M3-094 - Manual (Page 40)

40
The unit tag number will also be displayed
on each module, so that each module can be
reattached to the correct unit.
Figure 5 - Module Location Example
Module Assembly
The following tools are suggested for
equipment assembly:
• Power drill with 5/16” socket
• Come-along (2)
• ½” wrench and socket
• Crowbar
• Phillips-head screwdriver
1. Move the section chosen to be installed
first, to the correct position. It is
recommended to start with the heaviest
section. If that is not possible then the first
section may need to be secured to prevent it
from moving when additional sections of the
unit are installed.
The modules can be moved by rolling them
on pipes. The pipes should be spaced a
maximum of one foot apart. See the
following figure.