AAON M3-094 - Manual (Page 63)

63
Figure 37 - Access Door
Install the door on the opposite side of the
unit by attaching the hinge to the unit. Be
sure that the door is centered in the opening.
Rubber gasket needs to be applied on the
door jamb of the new door side. The door
latch parts will need to be removed and
replaced on the new door side.
Filters
Pleated filters install from upstream side of
filter rack. Filters are installed in columns.
For each column open snap-fasteners and
remove first filter. Slide the rest of the filters
to the opening and then remove.
Bag and cartridge filters are installed with a
type 8 holding frame. Use the provided clips
to attach new filters. Be sure to remove pre-
filter clips from cartridge filters before
discarding. Pre-filter clips will need to be
attached to replacement cartridge filters.