Camera interfaces, Status leds – ALLIED Vision Technologies Prosilica GX6600 User Manual
Page 41
Prosilica GX Technical Manual V2.0.8
41
Camera interfaces
Camera interfaces
This chapter provides information on Gigabit Ethernet port, inputs and outputs,
and trigger features.
Status LEDs
The color of the LEDs have the following meaning:
www
For more information on GigE accessories:
Figure 28: Prosilica GX connection ports
LED Color
Status
LED1
Flashing green
Camera is powered
Solid green
Camera is booted, and link with the
host is established
LED2
Flashing/solid orange
Ethernet activity
LED3
Flashing green
Camera is powered
Solid green
Camera is booted, and link with the
host is established
LED4
Flashing/solid orange
Ethernet activity
Table 13: Status of LEDs in Prosilica GX
Note
– Once the camera is booted, LED1/LED3 will remain solid
green as long as the camera is powered, even if connection
with the host is lost.
– All four LEDs are engaged only when camera is operated in
Link Aggregation Group (LAG) mode.
I/O PORT:
CAMERA POWER
EXTERNAL SYNC IO
RS-232 TX/RX
LED1
LED2
LED4
LED3
GIGABIT ETHERNET CABLE
MOUNTING HOLES
GIGABIT ETHERNET PORT 2
GIGABIT ETHERNET PORT 1